Description
𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧 :
The APC by Schneider Electric NetShelter APDU9000 Series Switched Rack Power Distribution Unit (PDU) may be used as a stand-alone, network manageable power distribution device or up to 32 devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads. User-defined alarms warn of potential circuit overloads. The Rack PDU provides full control over outlets through remote commands and user interface settings.
𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬 :
• Device power, peak power, apparent power, power factor and energy monitoring.
• Phase voltage, current, peak current, power, apparent power and power factor monitoring.
• Bank current and peak current (for models that support breaker banks).
• Configurable alarm thresholds that provide network and visual alarms to help avoid overloaded circuits.
• Various levels of access: Super User, Administrator, Device User, Read-Only, Outlet User, and Network-Only User (These are protected by user name and password requirements).
• Multiple user login feature which allows up to four users to be logged in simultaneously.
• Remote individual outlet control.
• Configurable power On or Off delays.
• Event and data logging. The event log is accessible by Telnet, Secure Co Py (SCP), File Transfer Protocol (FTP), Serial connection, or web browser (using HTTPS access with SSL/TLS, or using HTTP access). The data log is accessible by web browser, SCP, or FTP.
• Email notifications for Rack PDU Network Management Card (NMC) system events.
• SNMP traps, Syslog messages, and e-mail notifications based on the severity level or category of the Rack PDU and NMC system event.
• Security protocols for authentication and encryption.
• Network Port Sharing (NPS). Up to 32 APDU9000 Series Rack PDUs can be connected using the In and Out ports so that only one network connection is necessary.
• NPS guest firmware auto-update feature allows the NPS host to automatically pass a firmware update to its connected guests.
• Log files can be downloaded by inserting a USB Flash drive into the USB port on the Display Interface of the Rack PDU.
𝐈𝐏𝐯𝟒 𝐈𝐧𝐢𝐭𝐢𝐚𝐥 𝐒𝐞𝐭𝐮𝐩 :
You must define three TCP/IP settings for the Rack PDU before it can operate on the network.
• The IP address of the Rack PDU
• The subnet mask of the Rack PDU
• The IP address of the default gateway (only needed if you are going off segment)
𝐈𝐏𝐯𝟔 𝐈𝐧𝐢𝐭𝐢𝐚𝐥 𝐒𝐞𝐭𝐮𝐩 :
IPv6 network configuration provides flexibility to accommodate your requirements.
IPv6 can be used anywhere an IP address is entered on this interface. You can configure manually, automatically, or using DHCP.
Reviews
There are no reviews yet.